CermaKrome
Start Up and Maintenance Instructions
Notice of care:
Periodic cleaning of your parts can be accomplished by using a clean cloth dampened with mineral spirits or any other cleaning products that DO NOT contain caustics or acids. Once all foreign matter has been removed, the coating may be polished with a clean, soft cloth and a nonabrasive polish such as a wheel polish, Mothers Mag, Blue Magic, Eagle One Mag polish or any other aluminum polish. For satin finish coatings, periodic scrubbing with a red or grey Scotchbright pad may useful in removing oils and contaminants from the coating surface. Elbow grease on the tough spots is okay because the coating is very durable.
- WIPE WITH RUBBING ALCOHOL BEFORE INSTALLING
- INSTALL HEADERS
- AFTER INSTALLED, WIPE WITH RUBBING ALOHOL
- START CAR FOR 5 MINUTES, SHUT OFF, LET COOL
- START CAR FOR 10 MINUTES, SHUT OFF, LET COOL
Periodic cleaning of your parts can be accomplished by using a clean cloth dampened with mineral spirits or any other cleaning products that DO NOT contain caustics or acids. Once all foreign matter has been removed, the coating may be polished with a clean, soft cloth and a nonabrasive polish such as a wheel polish, Mothers Mag, Blue Magic, Eagle One Mag polish or any other aluminum polish. For satin finish coatings, periodic scrubbing with a red or grey Scotchbright pad may useful in removing oils and contaminants from the coating surface. Elbow grease on the tough spots is okay because the coating is very durable.
